Artfully Finished

120+ designs. 19 edges. And just one surface that's perfect for you. 
Once you choose a design, complete your plan by selecting a height and edge. 
Explore your edge profile options below.
 

Ridgeline Edge (TR3)

NEW. This simple, yet bold profile has a 1/8" radius and is sometimes referred to as a double pencil edge. Shown in Ellesmere™.

Available Depths
  • 2cm
  • 3cm
  • 4cm
  • 6cm
 

Bryn Edge (VF)

This profile, often called a reverse Waterfall, is a traditional design with a twist. Shown in Torquay™.

Available Depths
  • 4cm
 

Idris Edge (IM)

A reversed and sharply slanted mitered edge gives this profile a dramatic appearance. Shown in Berkeley™.

Available Depths
  • 2cm
  • 3cm
 

Shale Edge (1Z)

This edge seamlessly integrates flush with a cabinet door creating a modern, sleek look. Shown in New Quay™.

Available Depths
  • 2cm
 

Mesa Edge (QM)

This edge is a traditional ornate ogee edge reversed down, giving it a modern spin. Shown in Seagrove™.

Available Depths
  • 6cm
 

Cascade Edge (VFZ)

Combines a reverse Ogee edge stacked on top of a straight drop modernizing the traditional edge. Shown in Summerhill™.

Available Depths
  • 6cm
 

Cornice Edge (MQ)

Our fullest Ogee profile design, also called a Cove Ogee over Ogee. Shown in Praa Sands™.

Available Depths
  • 6cm
 

Moraine Edge (CHISELED)

For a natural, rustic appearance, choose this hand-finished profile often named Chiseled, Broken Edge or Rock Face. Shown in Buckingham™.

Available Depths
  • 2cm
  • 3cm
  • 4cm
  • 6cm
 

Ledge Edge (MD)

Fading back at the bottom edge, this profile is sometimes named a Reverse Bevel or Plater. Shown in Castlemartin™.

Available Depths
  • 3cm
 

Boulder Edge (F+V)

This profile, often called Waterfall, is one of our most ornate. Shown in Bradshaw™.

Available Depths
  • 4cm
 

Rimrock Edge (MITERED)

The Mitered edge is an edge assembled from two pieces, to give a countertop with less weight the appearance of a much heavier one. Shown in New Quay™.

Available Depths
  • 2cm
  • 3cm
 

Volcanic Edge (V)

Deeply rounded at the top and bottom of the edge, this profile is sometimes also called a Bullnose or Full Bullnose. Shown in Shirebrook™.

Available Depths
  • 2cm
  • 3cm
  • 4cm
  • 6cm
 

Glacial Edge (FZ)

A classic Ogee profile. Shown in Bellingham™.

Available Depths
  • 4cm
 

Basin Edge (FS)

Our thinnest Ogee profile. Also called a Saskatoon Ogee or Short Ogee. Shown in Braemar™.

Available Depths
  • 3cm
 

Treeline Edge (Z+S)

This angled edge is often called a Bevel. Shown in BERKELEY™.

Available Depths
  • 3cm
  • 4cm
 

Double Treeline Edge (A+R)

An angled cut to both the top and bottom edges, sometimes called a Double Bevel. Shown in Laneshaw™.

Available Depths
  • 2cm
  • 3cm
  • 4cm
 

Summit Edge (T)

Both the top and bottom edged of this edge profile are rounded. It’s sometimes called a ¼ Round Double.  Shown in Canterbury™.

Available Depths
  • 2cm
  • 3cm
  • 4cm
 

Piedmont Edge (A)

Softly rounded on the top edge. Additionally referred to as ½ Bullnose, Demi Bullnose or a ¼ Round. Shown in Wentwood™.

Available Depths
  • 2cm
  • 3cm
  • 4cm
 

Seacliff Edge (Z)

The edge is beveled, not rounded, at the top, often referred to as an Eased profile. Shown in Rosslyn™.

Available Depths
  • 2cm
  • 3cm
  • 4cm

*Some edge profiles may not be offered in all markets. Check with your local retailer for available options.

 

Back to Top